Any time a home’s water heater is not working, it can become a difficult situation for the homeowner and those residing in the home. Without heated water, many daily tasks are much more difficult to handle. Because of this, a homeowner will need to contact a Water Heater Repair Service Greeley CO, for help in correcting the problem as quickly as possible.
One of the most common reasons for a water heater to stop heating water can have to do with the pilot system on the unit. The pilot is used to light the burners to heat the water. While, at times, the pilot can become dirty and just needs cleaning, at other times the unit may be damaged or worn. If this is the case, it will need to be replaced. In addition, other components in the pilot system, such as the thermocouples, pilot control valve and more should also be inspected and replaced if necessary.
If a technician from a Water Heater Repair Service Greeley CO, does not find anything wrong with the pilot or burner system on the unit, he or she will generally begin inspecting the water coming out of the tank. This can be done by allowing some water to escape from the water release valve on the unit. By gathering the water draining out of the tank in a container, the technician can check it for signs of residue, such as sand or other grit. If this is present, the tank may be lined with these deposits and this can prevent the transfer of heat from the tank to the water. Click here for more details.
The easiest way to correct this type of issue involves flushing the system. The technician will allow all water to drain from the tank and then turn the water back on while the drain valve is still open. This causes water to flow through the tank and out the drain. This will push the sediment or deposits from the tank. A technician will generally allow water to flow until it is coming out clear. Once this is done, the water heater should be able to heat water again.
People who are experiencing issues with their water heater should contact a professional for help. This is often the fastest way to have the problem corrected and get the unit working again.
Be the first to like.